SUF-1D DIELECTRIC RODS, VOLTAGE INDICATOR AND PHASE COMPARATORS TESTING DEVICE

Price: netto

Product Categories: Electrical safety PPE testing

Product Page: https://venko.com.pl/en/produkt/suf-1d-voltage-detectors-tester/

Product Summary

The Testing Device SUF-1D is designed to testing:
• Unipolar voltage indicator up to 50kV;
• Bipolar voltage indicator up to 50kV;
• Unipolar phase comparators up to 50kV;
• Bipolar phase comparators up to 50kV;
• Dielectric rods by sinusoidal voltage (AC) up to 100 kV 50 (60)Hz.

Product Description

The Testing Device SUF-1D is designed to testing:

• Unipolar voltage indicator up to 50kV;
• Bipolar voltage indicator up to 50kV;
• Unipolar phase comparators up to 50kV;
• Bipolar phase comparators up to 50kV;
• Dielectric rods by sinusoidal voltage (AC) up to 100 kV 50 (60)Hz.

The Testing Device SUF-1D consists of four blocks:

1. the control unit;
2. two 50kV high voltage transformers
3. two voltage indicator testing stands SW-1
4. dielectric rods testing stand SD-1.

To test phase comparators, an inverter is built into the control unit that regulates the phase of the output voltage of one of the transformers between 0 and 180 degrees.
A voltage of 100 kV is generated by connecting two 50kV transformers in opposite phases, so that a voltage of 100kV is generated between the high-voltage leads of the transformers for testing the dielectric rods.

SW-1 Voltage and Phase Indicator Testing stand
• the stand is used for testing phasers with voltage up to 52kV in compliance with EN 61481 standard or voltage indicators up to 52 kV in compliance with EN 61243;
• test voltage up to 52 kV.

Hot Sticks testing stand SD-1
• maximum length of testing rods – 2m.
• maximum testing voltage – 100 kV on 300mm;
• possibility of simultaneous testing of one rod.
• quick installation in the operating position

Product Gallery